• The #1 specified bath accessory lines in hospitality.

  • previous page slider shape

Rectangular Rear Mount Tub Bench with Skis (WBTRS)

Rectangular Rear Mount Tub Bench with Skis (WBTRS)

Available Finishes
  • White Phenolic
  • Teak
  • 2" Padded Naugahyde
Available Sizes
  • 29" x 15"
  • 29" x 18.5"


Rectangular Rear Mount Tub Bench with Skis Benefits:

  • Rated up to 800 lbs.
  • Meets or exceeds all building codes, ADA criteria, and 2010 ADAAG and 2017 ANSI Standards
  • Must have 1.5” ledge on inside to use
  • Mounts on 30” wall opposite the control wall
  • The frame of the bench is 18/8 (304) Stainless Steel and the seat is automatically held in a raised position by a Stainless Steel friction hinge bracket attached to the end of the tub seat
  • When lowered in the down position, the bench rests securely on both the inside and outside tub ledge for support
  • Bench with Skis designed for tubs with a 12.5” – 14.5” Above Floor Finish (AFF) measurement
  • To meet ADAAG Standards, tub benches must be securely mounted and located 17” – 19” Above Finished Floor (AFF)
  • WINGITS® folding tub benches are designed to hold live loads in walls only and must be installed into either adequate structural blocking or with WINGITS® Patented Grab Bar fasteners (GBW40) – sold separately
  • Proudly made in the USA
  • PATENTS—Issued & Pending


Additional technical data is available on the Spec Sheet, available for download below.


Installation Guide


WingIts File/Info Request