Rectangular Rear Mount Tub Bench without Skis (WBTR)
Rectangular Rear Mount Tub Bench without Skis (WBTR)
- White Phenolic
- Teak Phenolic
- 2" Padded Naugahyde
- 29" x 15"
- 29" x 18.5"
Rectangular Rear Mount Tub Bench Without Skis Benefits:
- Rated up to 800 lbs.
- Meets or exceeds all building codes, ADA criteria, and 2010 ADAAG and 2017 ANSI Standards
- Must have 1.5” ledge on inside to use
- Mounts on 30” wall opposite the control wall
- The frame of the bench is 18/8 (304) Stainless Steel and the seat is automatically held in a raised position by a Stainless Steel friction hinge bracket attached to the end of the tub seat
- When lowered in the down position, the bench rests securely on both the inside and outside tub ledge for support
- Designed for ADA height tubs
- To meet ADAAG Standards, tub benches must be securely mounted and located 17” – 19” Above Finished Floor (AFF)
- WingIts® folding tub benches are designed to hold live loads in walls only and must be installed into either adequate structural blocking or with WingIts® Patented Grab Bar fasteners (GBW40) – sold separately
- Proudly made in the USA
- PATENTS—Issued & Pending
Additional technical data is available on the Spec Sheet, available for download below.
Rectangular Rear Mount Tub Bench without Skis is proudly made in the USA and rated up to 800 lbs. which exceeds the minimum 250 lbs. load requirement per the 2010 ADAAG and 2017 ANSI Standards. To meet ADAAG Standards, tub benches must be securely mounted and located 17” – 19” Above Finished Floor (AFF). The frame of the bench is 18/8 (304) Stainless Steel and the seat is automatically held in a raised position by a Stainless Steel friction hinge bracket attached to the end of the tub seat. When in the lowered position the bench rests securely on both the inside and outside tub ledge for support. Available in watertight White Padded Naugahyde, White Phenolic or Teak Phenolic.
Rectangular Rear Mount Tub Bench without Skis is designed to hold live loads in walls only and must be installed into either adequate structural blocking or with WingIts® Patented Grab Bar fasteners (GBW40) x 2. GBW40 is sold separately.
For Access to WingIts Pricing and Files Including Cad Design Please click and Fill Out our File/Information Request Contact Form
